Save the following into a text file with extension .bat and run it.
-------------------------- Copy below this line --------------------------
-------------------------- Copy abovet his line --------------------------@echo off
Echo.
Echo.
Echo **************************************************************************
Echo The recommended command-line window width is 168 characters to be certain of not having command over 2 lines.
Echo **************************************************************************
Echo.
CHOICE /C PV /M "Netscaler Physical or Virtual ?"
IF %ERRORLEVEL% == 1 SET NS=Phys
IF %ERRORLEVEL% == 2 SET NS=Virt
Echo.
REM we have 3 differents level of authentication and have created auth_profile and auth_vserver accordingly
:VIP_Authentification
ECHO.
ECHO ...............................................
ECHO Do you need authentication?
ECHO ...............................................
ECHO.
ECHO 1 - Authentification 401 Forest
ECHO 2 - Authentification 401 Corp
ECHO 3 - Authentification Form Base Forest
ECHO 4 - Authentification Form Base Corp
ECHO 5 - Authentification Form Base + RSA (Dual Auth)
ECHO 6 - No authentication
ECHO.
SET /P Auth=Type 1, 2, 3, 4, 5 or 6 then press ENTER:
IF %auth% GEQ 7 goto VIP_Authentification
IF %auth% == 0 goto VIP_Authentification
Echo.
set /P VipIP=Enter the IP address of the VIP:
Echo.
:Vip_type
CHOICE /C HS /M "What kind of VIP: Http gold Ssl?"
IF %ERRORLEVEL% == 1 SET VT=HTTP
IF %ERRORLEVEL% == 2 SET VT=ssl
set /P vPort=Enter the VIP port:
Echo.
set /P VipName=Enter the name of the VIP {LB_..._SSL} (If the VIP port is different than the default Change _SSL for _#### ):
Echo.
REM if the VIP is not addressable we will place it behind a Content Switching vServer
:Content_Switch
set "CSVS="
IF %VipIP% NEQ 0.0.0.0 goto IpNotNull
set csact=ACT_SEND_%vipname%
set cspol=CSPol_%VipName%
echo.
CHOICE /C EIB /M "VIP behind which content switch vServer: External, Internal or Both? "
IF %ERRORLEVEL% == 1 SET CSVS=Externe
IF %ERRORLEVEL% == 2 SET CSVS=Interne
IF %ERRORLEVEL% == 3 SET CSVS=Deux
:IpNotNull
:Sg_Type
echo.
CHOICE /C HS /M "Service Group type: Http or Ssl?"
IF %ERRORLEVEL% == 1 SET SGT=http
IF %ERRORLEVEL% == 2 SET SGT=SSL
Echo.
:MonitorType
IF %SGT% == http SET Mtyp=http-ecv
IF %SGT% == SSL SET Mtyp=https-ecv
:ServiceGroupPort
set /P BPort=Enter the port of the backend servers:
Echo.
:ServiceGroup_Name
set /P SGName=Enter the name of the Service Group {SG_...} Add _### if port is not 80:
Echo.
:Backend
choice /c 1234 /M "Enter the number of backend server without pressing enter?"
IF %ERRORLEVEL% == 1 SET nbr=4
IF %ERRORLEVEL% == 2 SET nbr=3
IF %ERRORLEVEL% == 3 SET nbr=2
IF %ERRORLEVEL% == 4 SET nbr=1
set nbrsvr=%errorlevel%
set svr=1
Echo.
REM clear the variables before using them for added security if the batch is run multiples times...
set "svr4name="
set "svr3name="
set "svr2name="
set "svr1name="
set "svr4IP="
set "svr3IP="
set "svr2IP="
set "svr1IP="
set "csrule1="
set "csrule2="
set "csrule3="
set "csrule4="
:while
if %nbr% lss 5 (
set /P Svr%nbr%Name=Enter Server %svr% name:
set /P Svr%nbr%IP=Enter server %svr% IP:
set /a nbr+=1
set /a svr+=1
goto :while
)
echo.
echo.
echo ************** copy line below this point in putty to create *****************
echo.
Echo add serviceGroup %SGName% %SGT%
If %nbrsvr% == 4 goto 4server
If %nbrsvr% == 3 goto 3server
If %nbrsvr% == 2 goto 2server
If %nbrsvr% == 1 goto 1server
:4server
if [%svr1name%] ==[] echo. && echo Server 4 name is empty restarting process... && echo.
if [%svr1name%] ==[] goto :backend
Echo add server %svr1name% %svr1IP%
Echo bind serviceGroup %SGName% %svr1name% %bport%
set csrule4=||HTTP.REQ.HOSTNAME.SET_TEXT_MODE(IGNORECASE).EQ(\"%svr1name%.company.com\")
:3server
if [%svr2name%] ==[] echo. && echo Server 3 name is empty restarting process... && echo.
if [%svr2name%] ==[] goto :backend
Echo add server %svr2name% %svr2IP%
echo bind serviceGroup %SGName% %svr2name% %bport%
set csrule3=||HTTP.REQ.HOSTNAME.SET_TEXT_MODE(IGNORECASE).EQ(\"%svr2name%.company.com\")
:2server
if [%svr3name%] ==[] echo. && echo Server 2 name is empty restarting process... && echo.
if [%svr3name%] ==[] goto :backend
Echo add server %svr3name% %svr3IP%
echo bind serviceGroup %SGName% %svr3name% %bport%
set csrule2=||HTTP.REQ.HOSTNAME.SET_TEXT_MODE(IGNORECASE).EQ(\"%svr3name%.company.com\")
:1server
if [%svr4name%] ==[] echo. && echo Server 1 name is empty restarting process... && echo
if [%svr4name%] ==[] goto :backend
Echo add server %svr4name% %svr4IP%
echo bind serviceGroup %SGName% %svr4name% %bport%
set csrule1=HTTP.REQ.HOSTNAME.SET_TEXT_MODE(IGNORECASE).EQ(\"%svr4name%.company.com\")
Echo bind serviceGroup %SGName% -monitorName %Mtyp%
IF %SGT% == SSL Echo set ssl serviceGroup %SGName% -ssl3 DISABLED
REM check if auth was selected
if Not %Auth% == 6 Goto Auth
Echo add lb vserver %VipName% %VT% %VipIP% %vport% -persistenceType COOKIEINSERT -timeout 0 -cltTimeout 180
Goto EndAuth
:Auth
if %Auth% == 1 set authVs=vs_Auth.company.com
if %Auth% == 2 set authVs=vs_AuthCorp.company.com
if %Auth% == 3 set AuthProf=Profile_Company_Auth
if %Auth% == 4 set AuthProf=Profile_Corp_Auth
if %Auth% == 5 set AuthProf=Profile_Corp-Radius_Auth
if %Auth% LEQ 2 Echo add lb vserver %VipName% %VT% %VipIP% %vport% -persistenceType COOKIEINSERT -timeout 0 -cltTimeout 180 -authn401 ON -authnVsName %authVS%
if %Auth% GEQ 3 Echo add lb vserver %VipName% %VT% %VipIP% %vport% -persistenceType COOKIEINSERT -timeout 0 -cltTimeout 180 -Authentication ON -authnProfile %AuthProf%
:EndAuth
Echo bind lb vserver %VipName% %SGName%
If %VT%==HTTP goto skipssl
REM we use an SSL profile for the SSL parameter and wilcard cert
Echo set ssl vserver %VipName% -sslProfile No_SSL3_profile
IF %NS% == Virt Echo bind ssl vserver %VipName% -certkeyName Company-Wildcard-SHA2
IF %NS% == Phys Echo bind ssl vserver %VipName% -certkeyName Company-wildcard
Echo unbind ssl vserver %VipName% -cipherName ALL
IF %NS% == Phys Echo bind ssl vserver %VipName% -cipherName claus-cipher-list-with-gcm
IF %NS% == virt Echo bind ssl vserver %VipName% -cipherName vpx-cipher-list
Echo bind ssl vserver %VipName% -eccCurveName P_256
Echo bind ssl vserver %VipName% -eccCurveName P_384
Echo bind ssl vserver %VipName% -eccCurveName P_224
Echo bind ssl vserver %VipName% -eccCurveName P_521
:skipssl
IF %VipIP% NEQ 0.0.0.0 goto IpNotNull2
echo add cs action %csact% -targetLBVserver %VipName%
echo add cs policy %cspol% -rule "%csrule1%%csrule2%%csrule3%%csrule4%" -action %csact%
if %CSVS%==Externe echo. && echo sh cs vserver CS_Company_External_app && echo. && echo bind cs vserver CS_Company_External_app -policyName %cspol% -priority xxx
if %CSVS%==Interne echo. && echo sh cs vserver CS_Internal_App && echo bind cs vserver CS_Internal_App -policyName %cspol% -priority xxx
if %CSVS%==Deux echo. && echo sh cs vserver CS_Internal_App && echo bind cs vserver CS_Internal_App -policyName %cspol% -priority xxx
if %CSVS%==Deux echo. && echo sh cs vserver CS_Company_External_app && echo. && echo bind cs vserver CS_Company_External_app -policyName %cspol% -priority xxx
echo.
echo.
Echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo + Since we don't know what priority are available on the +
echo + Content switching, the last two command above show the CS vserver +
echo + so that you manually type the priority on the Bind policy... command +
Echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
:IpNotNull2
Echo.
echo ************** copy line above this point in putty to create *****************
echo.
echo.
Echo ********************************************************
Echo * Do not forget to create the DNS entry ... *
Echo * Run the following commands to create them internally *
Echo ********************************************************
echo.
echo.
for /f "tokens=1 delims=." %%a IN ('echo %VipName%') DO (
set DNSLBNAME=%%a
)
for /f "tokens=2 delims=_" %%b IN ('echo %DNSLBNAME%') DO (
set DNSLBNAME2=%%b
)
echo.
IF %VipIP% == 0.0.0.0 goto IpNull
echo dnscmd %LOGONSERVER% /RecordAdd company.com %DNSLBNAME% /CreatePTR A %vipip%
echo dnscmd %LOGONSERVER% /RecordAdd company.com %DNSLBNAME2% A %VipIP%
echo.
:IpNull
echo.
echo dnscmd %LOGONSERVER% /RecordAdd company.com %DNSLBNAME2% CNAME CS_Internal_app.company.com
echo.
Echo **************** End DNS commands *****************
echo.
echo. Completed, this is the end of the batch file
echo.
pause
That's the batch file I use now to create VIP into the Netscaler.
