Off topic according to the rest of my blog but I need to write this information down to be able to find it back easily...
To relearn the TPMS position after rotating the tire on a chevrolet 2018 (Cruze 2018 but probably works for other chevrolet also)
1- Press and hold the start button for 5-6 Seconds without pressing the brake pedal, this will put your car into service mode
2- Go into the tire pressure menu in between the Speed and RPM counter
3- Press and hold the "checkmark" button in the steering wheel for about 5 seconds,
4- Your car will ask if you want to go into relearn mode, choose yes, the horn will ring twice.
5- Use the TPMS relearn tool (EL-50448) on the tire near the valve, (start with the front left, front right, rear right, rear left, the turning light is on to signal you which tire you need to do) the car will horn once when the signal is received correctly telling you to go to the next tire.
6- Your car will horn twice confirming the end of the relearn process.
Ref: https://youtu.be/ifr6D1Md9Dg
